Quote Originally Posted by Superjustin13
I'v been LIterally searching for hours and i cant find one!!!

ok

Need Forged piston

72CC head, 350CI, .040 over, 3.750" Stroke, 5.7" or 6" rod. NEEDS to be 9.5-1 Compression no lower or higher.

needs to be able to Hold built stroker + 200 Shot nitrous

thanks!!

PLease someone proove me wrong, and find me a piston that fits my Criteria, dont wanna custom order em from JE
I hope you don't think this will run on pump gas.
I would never try it with the bottle on.
At 200 hp I would run a seperate fuel system for the gas solenoids with a hi-octane race gas.
Don't forget you can always "fly cut" and jockey you gasket thickness around to get the comp. ratio correct.