Thread: 327 build opinions

Tweet

hey everyone, iv put together my first engine did alittle research here and there but deff. not enough but here is what i have on my hands tell me how i did. please be nice
afr 180cc 64cc combustion chamber
5cc valve reliefs
comp magnum 292h cam .501 lift hyd. lifter (wondering about this)
1.6 roller rockers
edlebrock torker intake
650cfm carb
This engine is going in a back in a fiero so the car does not weigh all that much and has rather low gearing, so max tq is not a huge concern. it will also just be a weekend street car with a few trips to the track.

edit: just looking at #s and i see that this is most likley not a 327 with a cast # of 3970010 and with the 4 bolt mains this narrows it down to either a dz302 or a 350. the guy i bought it from is a experienced engine builder and iv heard rumor of 4 bolt 327 comming out of industrial trucks and he did mention truck block, if i remember correctly. so im not counting the 327 out completely. im goin to look for the dz code in the morning.
considering this what type of power increase could be expected from a 327vs 350.