Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Finally Started New Engine (Feels like a harley)
          
   
   

Results 1 to 7 of 7

Threaded View

  1. #3
    67CamaroProject's Avatar
    67CamaroProject is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2006
    Location
    Santa Rosa
    Car Year, Make, Model: 1967 Camaro
    Posts
    33

    I hope it is covered under warranty... I bought it from Summitt when we started to build the engine, it was a few months ago. The site says that they only warranty the product for 90 days. I hope they'll still cover it under warranty seeing as I only had it running in the car for 30 minutes...

    On another note: I just got done changing the oil after the initial break in, and looked carefully at the engine for any other problems. I noticed my wire covers that I ran over my wiring in on the firewall melted near the headers. Do any of you know of a better wire cover that will withstand heat better than the black plastic covers? The wires are ran about 4 inches above the header on the firewall and the plastic still melted. Any suggestions would be greatly appreciated.
    Last edited by 67CamaroProject; 02-05-2007 at 05:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink