Thread: 350 top end build
-
01-03-2007 04:35 PM #1
350 top end build
would i be able to put this top end kit ( EDL-2098) from summitracing.com on a 350 bored 30 over. Would i have to worry about piston to valve clearence. what would be my sompression ratio after this install. any help will be great.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-03-2007 06:13 PM #2
This RPM kit will not support vacuum operated accessories such as power brakes and may require an aftermarket converter with a looser stall speed.
You have landed yourself right in the middle of a large number of bonafide small block Chevy experts. If you will tell us all and I mean all the details of the vehicle and exactly what you want the vehicle to do, we can detail a combination of parts to get you there.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project