Thread: Thread depth/holding power
Threaded View
-
12-13-2006 12:23 PM #1
Thread depth/holding power
Poly locks on the rockers......are 5 1/2 turns enuff to hold them down?
Stock studs and roller rockers ,460 ish lift and mild springs.
There soo long ,it just seems like 20 turns would hold better,...but the studs would need to be real long.I guess the extra length on the locks are so you can install a girdle ?Last edited by shawnlee28; 12-13-2006 at 12:27 PM.
Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance