Quote Originally Posted by BigTruckDriver
You can get each to reach the same maximum HP.If they were all made to make 1000 horses, will one be better than the other on a 1/8 mile dragstrip,1/4 mile dragsrip?
Oh,no here we go again.
First we will have to look at aftermarket blocks to handle the hp.
I would not use an aftermarket block to try and build a 350 out of.
I would build a 434+ cube engine.
To make a 1,000 hp sbc you will need very good parts ie-heads,crank,rods,piston,cam.
Just don't be afraid to get out the old check-book,
We could be here all day on this one.