Hybrid View
-
11-14-2006 04:55 AM #1
Is serpentine belt parts interchangable for V8 and V6?
I have a 1987 SBC 305 I want to put the serpentine setup on it. Can I use the setup from a V6 Camaro/Firebird, or are the brackets and accessories different.
Also, I dont need the smog pump, can I use a smaller belt and not put the pump in, or do I need it in there anyway as an idler pulley?
TJ
-
11-14-2006 04:58 AM #2
Well I know they have a smaller (shorter)belt, and I'm almost certian that everything from the V6 will bolt right on. If I'm wrong I'm sure somone will speek up.Charlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
11-14-2006 07:48 AM #3
The 4.3 six stuff is the same. If you dont need the smog pump, you should eyeball the belt path...it should wrap without another idler.
Be aware that there are two different bolt patterns for the end of Chevy small block heads. Make sure your brackets fit the heads that you have before you go too far....
mike in tucson
-
11-14-2006 09:48 AM #4
Like Mike said the 4.3 stuff should be usable. Astro Vans, s10 and full size pick ups. Be careful with the Camaro/Firebird stuff because they were mostly 60* 2.8's, 3.1's and 3.4's so the brackets wouldn't be a bolt on for your small block.
MarkIf money is the root of all evil... Women must be the fertilizer...
Link to my BAD AST Build Thread:
http://www.clubhotrod.com/suspension...van-build.html
-
11-14-2006 11:08 AM #5
Originally Posted by robotAllengator
TC #3240
ACES #07491
Ft Worth, TX
1966 Chevelle Malibu Ragtop
1951 Chevy Sedan Delivery
I had to go to the doctor's this morning. He told me that my sugar was too high so I came home and put it on a lower shelf. I feel better already.
the Official CHR joke page duel