Thread: cam and converter???
-
11-01-2006 04:57 PM #1
cam and converter???
i have a 406 with a 488 lift cam 292 duratin i am putting it in my 76 gmc 1/2 ton pickupand i need to know what converter to use .tire size are P235/ 75 R 15 andthe gears are for towing not really high way gearsLast edited by cutlassman_406; 11-01-2006 at 06:58 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-01-2006 05:07 PM #2
what rear gear and how tall a tire are you gonna run?
-
11-01-2006 05:19 PM #3
the tire size are P235/ 75 R 15Last edited by cutlassman_406; 11-01-2006 at 06:58 PM.
-
11-01-2006 07:15 PM #4
use a 9 inch 4500 stall craig
-
11-01-2006 07:34 PM #5
Somewhere around 3,500 stall, but call these guys and get the exact right answer before you buy. www.hughesperformance.comPLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project