Thread: Help on Engine rebuild
Results 1 to 4 of 4
Threaded View
-
11-09-2003 01:46 PM #2
Mondy,
Streets is right. Kinda hard to make a recommendation without enough information. If you power brake the car, (Full throttle while holding the brakes down) What RPM will it rev too before it stops or it over powers the brakes? What is the timing set at? How much total timing does it have and what RPM is it coming in? What ignition system do you have and does it still have vacuum advance or is it all mechanical? How does it move once it gets rolling? Is there an RPM range where it really starts pullng strong? What RPM will it rev to? Since you did not mention it, I am assuming that it doesn't bog when you punch it. If you can give us some of that info maybe we can help you sort it out.
PatOf course, that's just my opinion, I could be wrong!





LinkBack URL
About LinkBacks
Reply With Quote
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!