Hello all. Great forum! I am looking for head/cam ideas for the following -

I have in my posession -

- .060 over 4 bolt 350 block, just back from machine shop
- .060 over KB Hypereutectic Pistons, (KB114's for a 6 inch rod, .388 dome, listed CR is 12.9 w/ 64cc 10.9 w/76cc head)
- Stock 400 crank and rods.


The vehicle this will be for is an '85 S10, 3300lbs. Already in the truck is a 3200rpm converter, 4.56 gears using 31" tall tires, and good headers.

This truck will get VERY little street duty, meaning race fuel is not a problem. I look forward to your head/cam suggestions.