Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Looking for ideas.
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    nurkvinny is offline Registered User Visit my Photo Gallery
    Join Date
    Aug 2006
    Location
    Columbus
    Posts
    2

    Looking for ideas.

     



    Hello all. Great forum! I am looking for head/cam ideas for the following -

    I have in my posession -

    - .060 over 4 bolt 350 block, just back from machine shop
    - .060 over KB Hypereutectic Pistons, (KB114's for a 6 inch rod, .388 dome, listed CR is 12.9 w/ 64cc 10.9 w/76cc head)
    - Stock 400 crank and rods.


    The vehicle this will be for is an '85 S10, 3300lbs. Already in the truck is a 3200rpm converter, 4.56 gears using 31" tall tires, and good headers.

    This truck will get VERY little street duty, meaning race fuel is not a problem. I look forward to your head/cam suggestions.

  2. #2
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Well, let's get squared away on the rods first. You say you have KB's for a 6" rod, then you say you have stock 400 rods. Stockers are 5.565", so your KB pistons won't work with them.
    WAZZUP???????
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  3. #3
    erik erikson's Avatar
    erik erikson is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    clive
    Car Year, Make, Model: BLOWN 540 57 CHEVY
    Posts
    2,878

    Quote Originally Posted by nurkvinny
    Hello all. Great forum! I am looking for head/cam ideas for the following -

    I have in my posession -

    - .060 over 4 bolt 350 block, just back from machine shop
    - .060 over KB Hypereutectic Pistons, (KB114's for a 6 inch rod, .388 dome, listed CR is 12.9 w/ 64cc 10.9 w/76cc head)
    - Stock 400 crank and rods.


    The vehicle this will be for is an '85 S10, 3300lbs. Already in the truck is a 3200rpm converter, 4.56 gears using 31" tall tires, and good headers.

    This truck will get VERY little street duty, meaning race fuel is not a problem. I look forward to your head/cam suggestions.
    Like Richard said.What is your rod length?If you can answer that we can help.

  4. #4
    mod67's Avatar
    mod67 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2006
    Location
    Chico
    Car Year, Make, Model: 2006 Harris Modified, 1956 Chevy Pu. BB
    Posts
    63

    12.9 CR is a bit much for pump gas. that fancy $6.00 a gallon VP110 gets expensive. But for my Money, 64 cc World Products heads, ISKY 547-A Mechanical Flat tappet cam.
    Edelbrock Victor JR on Alcohol. I ran this combo a couple years back in a 383. It was a great combo. I only run Roller cams now. If your budget will allow, there are some good ones out there.

  5. #5
    nurkvinny is offline Registered User Visit my Photo Gallery
    Join Date
    Aug 2006
    Location
    Columbus
    Posts
    2

    Thanks for the replies so far.

    I will have to re-measure the rods tonight. I am all but certain that they were 6".

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink