Thread: blower motor ?,s

Tweet

I used to run a stock HEI with an adjustable vaccuum advance. I had some problems with it. I talked to a guy that builds engines and I was advised to cap or lockout the vaccuum advance and put the lightest mechanical advance springs I could find. I then set the initial timing at 15 degrees and total of 32 to 36 degrees all in at idle. Believe it or not it works. Blowers like advance and lots of it. As far as gaskets, call Holley. They bought B&M years ago. You can even go to Kragen Auto Parts and order the gaskets. I have ordered parts for my B&M Powercharger 250 there.

thanks guys, ordered the gaskets long what but coming thou;i'm gonna rip it apart then work on the dist. problem got ideas from ya thks mike

Originally Posted by kipster40

thanks guys, ordered the gaskets long what but coming thou;i'm gonna rip it apart then work on the dist. problem got ideas from ya thks mike

anytime, kipster40!