Thread: What causes low rpm hesitation?
Results 1 to 15 of 25
LinkBack URL
About LinkBacksHybrid View
-
05-22-2006 01:49 PM #1
CHR Member
- Join Date
- Aug 2004
- Location
- Portsmouth
- Car Year, Make, Model: 1935 Chevy Master Sport Coupe
- Posts
- 98
I could be the springs on the metering rods. They might be lifting the rod out of the jet at idle. Really rich and gassy. Also if you can turn the idle screws in and out with no effect,your throttle plates are not adjusted right or metering rods again. Aren't edlebrocks wonderful
If it's not broke, fix it anyway.
-
05-23-2006 08:55 PM #2
CHR Member
- Join Date
- Mar 2004
- Location
- Taylor
- Car Year, Make, Model: 1929 Essex Coupe
- Posts
- 29
You can download a PDF file of the users manual for Edelbrock carbs at their site. www.edelbrock.com
I'm having the same problem with mine. I'm leaning toward the metering rods and jets. I put the elec. choke kit on my manual choke carb and I think I need to change the jets and rods also.
GaryBhttp://www.nucwa.com/page2.html
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Even though I know he won't see this, I still want to wish a Happy Birthday to my best friend, Richard Moore aka techinspector1
Happy Birthday techinspector1