Thread: 327 piston orientation
Results 1 to 2 of 2
LinkBack URL
About LinkBacksHybrid View
-
10-12-2003 10:14 AM #1
Registered User
- Join Date
- Oct 2003
- Location
- NEW YORK
- Car Year, Make, Model: 68 Vette
- Posts
- 1
327 piston orientation
Hi Listers
I need to know the correct orientatation for the pistons in a 68 327/350 engine. Do the valve clearance cuts go on the top ? I think they do , but want to be sure when aseembling this engine. Thanks for your help
-
10-12-2003 10:32 AM #2
CHR Member
- Join Date
- Jul 2003
- Location
- Beaver
- Car Year, Make, Model: 90 Jeep Wrangler
- Posts
- 368
there should be a mark, an arrow like or a line, on the piston topand that goes toward the front of the motor.
if no mark, then it may depend on what specific pistons you have...see http://www.beckracing.com/page22.htm - there are choices...Chris
Only the dead fish go with the flow.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build