Thread: Help me out...
-
04-05-2006 08:04 AM #1
Help me out...
I've started planning out my own engine and I want to know what you guys think about it...
Crank- Cast steel eagle crank /w 3.75 stroke
Rods- Scat forged 5.7"
Piston- Speedpro Hypereutetic flat top
Cam- not exactly sure on specs but i'd like about .480-.500 lift with a
somewhat short duration, flat tappet cam.
Heads- Factory gm 441 castings /w 76cc combustion chamber /w
spring/valve/rocker upgrade.
Intake- Professional products i believe its their "Cyclone" manifold
Carb- I have the factory q-jet that i could modify, or i could use a good
holley carb
Here's the catch- will this work with about 100-150 shot of nitrous? Could it go a little more? a little less?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-06-2006 12:13 PM #2
i'd really appreciate any info on this because i plan to start buying the parts to put this build together this weekend and i need to know if it will work before i spend the money. I want to run nitrous but not really more than a 200shot and if using hypereutetic pistons will let me do this, then there's no reason to fork out the extra cash for forged pistons...
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance