Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Camshaft Installation
          
   
   

Results 1 to 9 of 9

Threaded View

  1. 03-29-2006 07:57 PM #3
    Tbifuzzy
    Tbifuzzy is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Mar 2006
    Location
    Vincennes
    Posts
    4

    They aren't tight at all, actually they were very loose... What really bothers me is it was bending pushrods... When i put the timing chain on the gears i have to get the #1 at TDC and then line the gears up dot to dot... would it matter if i was only a tooth or two off? would that make it bend rods? and does anyone know if i need to advance or retard the crank gear because of the size of my cam?


    I have no idea what to do, and why it is bending rods... any suggestions?
    Last edited by Tbifuzzy; 03-29-2006 at 11:08 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink