Thread: Oil or assembly lube?
-
03-07-2006 06:36 PM #1
Oil or assembly lube?
Can I use standard oil on the bearings while checking rod to cam and crank to block clearances on my 383 or should I use assembly lube?Jason
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-07-2006 06:42 PM #2
oil works fine for this cleans off easy for set up
Finally tracked down my AC leaks, had to buy a sniffer tool to do it. It was one hose fitting that attached to the condenser and one quick connect fitting on my AC manifold hose. The thrill of...
Stude M5 build