Thread: 671 blower repair
Hybrid View
-
02-20-2006 09:49 AM #1
671 blower repair
I need to freshen up ( new bearings and seals ) on my 671. Is this a procedure that a backyard mechanic can do or does it need to be sent away to a legit repair station ? appreciate any help or guidance.
-
02-20-2006 10:06 AM #2
I would send it off to a blower shop, I tried to rebuilt my own blower and it didnt come out right and had to end up sending it to a blower shop
-
02-20-2006 10:09 AM #3
i put bearings in my GM 6-71's. mark the gears, so you can put them back on the way they came off. i called one of the bearings places and gave them the # off of the bearings, and never talked to a blower place. i always bought old blowers anyway and put new end plates on them myself.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
02-20-2006 10:26 AM #4
Re: 671 blower repair
Originally posted by scott78
I need to freshen up ( new bearings and seals ) on my 671. Is this a procedure that a backyard mechanic can do or does it need to be sent away to a legit repair station ? appreciate any help or guidance.
Could it be a 10114182? If so, it is a Gen V 454, 4 bolt 1991 (or later). Hope that helps..
GM Engine de-coding