Thread: 350 Distributor choice
Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
02-07-2006 07:26 PM #1
CHR Member
- Join Date
- Dec 2003
- Location
- Fallbrook
- Car Year, Make, Model: 46" Ford 2dr Sedan
- Posts
- 146
350 Distributor choice
Yo all - Need some advice on a new engine - have a new 350/330/crate chev motor - putting it into a '46 Ford 2dr sedan - just a cruiser - which distributor should I use? HEI? Pertronix? also can I use a single line (no return) mech fuel pump with this engine - it will be carburated. And can anyone suggest a dampner? Many thanks
-
02-07-2006 07:34 PM #2
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
For a cruiser motor, stock HEI
Single line ok. Do not exceed 6 psi fuel pressure at the carb inlet.
Call these guys about the damper. It's all they do.
http://www.damperdoctor.com/PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
02-07-2006 07:41 PM #3
CHR Member
- Join Date
- Sep 2003
- Location
- Jonesboro
- Car Year, Make, Model: 32 Ford Roadster/26 T Sedan
- Posts
- 253
You can get a new Accell (sp?) HEI for about $120 at most chain parts houses. It will handle a 350 crate just fine. In m y motor I an running a stock points distributor converted to HEI by the Sparkman Dave Ray http://www.davessmallbodyheis.com . Lots of fire. More expensive but, in my humble opinion, better.An Old California Rodder
Hiding Out In The Ozarks
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I'm on Firefox and generally don't have any problems.
Back online