Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: glowing converter
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    soup's Avatar
    soup is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    coruna
    Car Year, Make, Model: 84 el camino
    Posts
    36

    glowing converter

     



    ps have new exhaust system before engine swap, only 15-17 vacuum right now ?

  2. #2
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Re: glowing converter

     



    Originally posted by soup
    ps have new exhaust system before engine swap, only 15-17 vacuum right now ?
    how much did you have before? 17 is good at idle. sounds lean or late timing.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  3. #3
    soup's Avatar
    soup is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    coruna
    Car Year, Make, Model: 84 el camino
    Posts
    36

    converter

     



    pulled converter run at 1500 rpm 19-20 vacuum ,converter looks okay ,but ocassional blue flame,might be flooding, last carb i got was doing that,rev ,s up fine n o bark or hesitation, won,t idle below 1500, starts to shake ?

  4. #4
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Re: converter

     



    Originally posted by soup
    pulled converter run at 1500 rpm 19-20 vacuum ,converter looks okay ,but ocassional blue flame,might be flooding, last carb i got was doing that,rev ,s up fine n o bark or hesitation, won,t idle below 1500, starts to shake ?

    that could be either, vac leak=lean or running rich, 17" of vac. at 1500 don't mean much, you gotta get it down around 8-900 rpm's. to get a reading.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink