Thread: chevy

Tweet

i have 350 4 bolt main bored 60 over speed-pro pistons floated pins i had a set of dart iron eagles head 230cc 64 cc but i sold them and bought me a set of double hump heads had them ported and dual springs shaved to 58 cc i had like 10to1compression i dont know what the compression going to be now and i have 1.5 harland sharp roller rockers manley guide plates 2.02 and 1.60 valves and a lunati cam .517/.543 lift solid lift cam do u all think this would be a good race engine and do u all think that i would have to change push rods with these heads because my dart heads had flat guide plates and these have the raised guideplates i have the crane moly push rods stock length im going to put the motor a 1986 grandprix and i have a 2800 stall what do u all think