Thread: 2.020 valves in 441 heads
-
11-28-2005 06:28 PM #1
2.020 valves in 441 heads
can i just put them in there?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-28-2005 08:52 PM #2
yeah, you can cut the seats larger and install 2.02 valves, but why would you want to spend money on these heads when there are better heads to be had? You'd also have to do some bowl blending to match up with the larger seats and I don't know if you'd really gain anything when you were all through anyway. Matter of fact, the heads might flow worse due to the shrouding of the intake at the chamber wall if you don't go in with a cutter to give 'em some room. That's just my opinion.Last edited by techinspector1; 11-28-2005 at 09:02 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
11-28-2005 09:12 PM #3
yes techinspector i think your rigth
-
11-29-2005 07:56 PM #4
gracias! im only sticking with these heads because they were 25 bucks new and im on a budget
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel