Originally posted by erik erikson
What I was asking about was the boiling of the water if it would cause the balancer to seperate from the interia ring.

IM sorry i read something else into it. as far as IM concerned boiling water in a pot, don't do nothing either way. the motor will get that hot, when its running so the HB wouldn't never stay on. you ever put your hand on a block after you cut the motor off. i really hope Ed ke6bnl ant in the house boiling his HB now. i would say if you was to get the hub hot enough to expand that thick metal it would separate from the interia ring, but 230 degrees want.