Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 91 350 for my 68 chevelle
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    Drewz68's Avatar
    Drewz68 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    Grant
    Car Year, Make, Model: 68 Chey Chevelle
    Posts
    7

    91 350 for my 68 chevelle

     



    Thank you in advance, bear with me if this is a dumb question, Here goes:
    I have the opportunity to pull a gm 350 out of a trashed 91 GMC pick up, the motor was rebuilt about 15k miles ago, seems to run fine. Can I change the intake and carb and install it into a 68 chevelle? Are there any other pitfalls I may encounter? Thank you again!!!
    newbie, but learning fast...

  2. #2
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Re: 91 350 for my 68 chevelle

     



    Originally posted by Drewz68
    Thank you in advance, bear with me if this is a dumb question, Here goes:
    I have the opportunity to pull a gm 350 out of a trashed 91 GMC pick up, the motor was rebuilt about 15k miles ago, seems to run fine. Can I change the intake and carb and install it into a 68 chevelle? Are there any other pitfalls I may encounter? Thank you again!!!
    you can do that. you'll need to buy a late model intake. why not use the wiring harness and computer and leave everything like it is?
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  3. #3
    Drewz68's Avatar
    Drewz68 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    Grant
    Car Year, Make, Model: 68 Chey Chevelle
    Posts
    7

    I have never done the electical swap, I think that might be a little over my head.
    newbie, but learning fast...

  4. #4
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    If you go to a carb, you have to get a distributor with an advance in it, too.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink