lol.......long story..............well i had the engine reconditioned by the owner b4 i bought it, he put a mild cam in it but not new lifters. So after realizing my car was missing lots of power i finally popped the valve covers to see if the rockers were tight. One was all loose and a few others werent too tight. So i tightened them up, and made some carb adjustments. Soon after the problems got worse and worse. Anyways to make a long story short i pulled the intake mani and noticed my lifter on the other side of the engine and a head stud pulling out. I cut it and began drilling a hole. but it went the wrong direction-lol. Its cool tho im gettin a remanufactured head for 150