Thread: How much est. HP??
-
06-04-2005 10:41 AM #1
How much est. HP??
I built a new stroker, 383 using 75 CC heads 1.6 2.02 valves 8:1 CR running a B&M 144 teflon supercharger @ 8PSI at 5000 RPM
It runs an MSD 6, pro billet Dist. blaster ss coil and an edelbrock 750 CFM. thorley headers 2-1/2 +- Diameter with 3" exhaust - flowmaster muffs. - given the specifications - roundabout what type of HP do you guestimate that I am putting out??
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-04-2005 11:53 AM #2
what cam do you have in it?
-
06-04-2005 12:24 PM #3
CAM
I am running a 268 comp supercharger cam, not 100% on the spec's, but it is specially ground for a supercharger - stock not a custom grind.
-
06-04-2005 02:41 PM #4
roughly 400hp @ 5000rpm without knowing cam lift and what type of liftersbelt gear ratio, etc.
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel