Results 1 to 15 of 126
LinkBack URL
About LinkBacksThreaded View
-
04-26-2005 07:55 PM #11
CHR Member
- Join Date
- Jan 2005
- Location
- Elkhart
- Car Year, Make, Model: 1957 chevy Belair
- Posts
- 316
good quench comes closer than .039? I usually run .020 but no less than .016 depending on rpm usage....
At Piston to Head clearance of .020 at an rpm of 8200....The piston will have a very small shiny spot on it.....
Read the Engine Masters 2004 shoot out and look at the pic's when they show the P to H clearance....
I would also add....If I were to build a 500hp streetable small block I'd go with a 400sm blk. where you could use AFR 180's and a 230 duration cam a 9.0:1 would put you right close to the ball park....Last edited by dr_bowtie; 04-26-2005 at 07:57 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!