Originally posted by yodasands
From what I understand that is the new timing mark with no advance.

I am completely confused by this whole setup. When we try to start it like this we get a lot of gas blow back through the throttle body.

Dan
you are out of time. so you are using the new mark to set your dist. on #1. you cant change where #1 is any time you want to, so i dont know that that guy is doing. have you tried it on the old mark? or pull the valve cover and see if the valves are closed on either mark. unless he put that HB on your motor and found the TDC then he had no way of knowing where to put that mark. i dont think he meant for you to set your dist. using that mark. you need to be talking to him i think.