Thanks Denny for your post....Maybe this will help my situation. I just found my cam card but I don't really know how to read it. My scanner is broke so I'll write down the info:

Grind #10044

VALVE SETTING: INTAKE HYD EXHAUST
------------------------------------------------------------------------------------
INTAKE @ CAM .320 @VALVE .480 `

ROCKER ARM RATIO
1.75

LIFT:EXHAUST @CAM .320 @VALVE .480

ALL LIFTS BASED ON ZERO LASH AND THERRETICAL ROCKER ARM RATIO
-----------------------------------------------------------------------------------
CAM TIM.
@.005 LIFT

OPENS........... INTAKE 37 BTDC
CLOSES........... 75 ABDC
ADV DURATION. 292

OPENS............. EXHAUST 75 BBDC
CLOSES..............37 ATDC
ADV DURATION... 292
------------------------------------------------------------------------------------
CAM TIMING
@.050

OPENS.............INTAKE 8 BTDC
CLOSES...........42 ABDC
MAX LIFT..........107 ATDC
DURATION........230

OPENS..............EXHAUST 46BBDC
CLOSES............4 ATDC
MAX LIFT...........111 BTDC
DURATION.........230
------------------------------------------------------------------------------------

I have no idea how to read this. I was just told that the cam was a 292/512 from the builder. Does this add up? I also noticed that the rocker arm ratio is 1.75? I thought racker ration for SBC is 1.5 or 1.6