this is what you should be looking at.
Printable View
this is what you should be looking at.
k, is it possible to drive with out this? lol
Quote:
Originally posted by lt1s10
this is what you should be looking at.
Quote:
Originally posted by Classic_4_LIFE
k, is it possible to drive with out this? lol
i wouldnt you can, but want have a passing gear. you would burn the trans up.
go to a parts store later on and tell them what kind of trans you have and tell them you need a kick down cable.Quote:
Originally posted by lt1s10
i wouldnt you can, but want have a passing gear. you would burn the trans up.
wuts the part called that goes on the trany, it puts the car into gear?
Quote:
Originally posted by Classic_4_LIFE
wuts the part called that goes on the trany, it puts the car into gear?
shifter linkage, shift leaver on the left side puts it in gear.
where shud i go to get it? i went to auto zone, called napa auto parts, kregian and numerous other places and i cudn't find it
i must be good life. im beginning to think youer pulling my leg. this is the NAPA part # and cost. cant see it very good, but the part store has a good pic.:rolleyes: :cool:Quote:
Originally posted by Classic_4_LIFE
where shud i go to get it? i went to auto zone, called napa auto parts, kregian and numerous other places and i cudn't find it
you still have to have a bracket to hook it in at the carb. naps may have them or jigs.
No, i can find the kick0down cable, i meant the shift linkage, that ones more important cause i wudn't be able to drive at all, Though i must u have been a great help, THANK YOU for all that you have done
the shift linkage that was on the powerglide should work.Quote:
Originally posted by Classic_4_LIFE
No, i can find the kick0down cable, i meant the shift linkage, that ones more important cause i wudn't be able to drive at all, Though i must u have been a great help, THANK YOU for all that you have done
may not line up 100% but you can drive it that way with no problem.
but the power glide was a 2 speed and the 350 turbo is a 3 speed, will it still work?, and if so i can just rip off the old one and put it in the new one with no other attackments?
use the linkage youve got, the detent is in the teans. if you want yor can get a different dial that shows all 3 gears, but its only for looks. :cool:Quote:
Originally posted by Classic_4_LIFE
but the power glide was a 2 speed and the 350 turbo is a 3 speed, will it still work?, and if so i can just rip off the old one and put it in the new one with no other attackments?
you may have to adj. your linkage a little.
ok, i don't know what to do for that, Can u run me through it like a step by step on what to do cause i'm at a lose