-
01-26-2005 05:07 PM #1
Bogging
I've been having a problem here lately and wondering if anyone could give me a hand. It seem that at WOT, when i get up to about 55-65, it starts bogging down, but when i let off and open it back up it does fine one up to 100. I'm really thinking it's got something to do with the carb(edelbrock quadrajet 750), but then again, it could bve th ignition, i don't really know alot about either. Just hoping someone might have a useful opinion, andy help will be greatly appreciated.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-26-2005 05:45 PM #2
Re: Bogging
is it a Q-JET or edelbrock? cant be both. if it on a chev. its more than likely be a Q-JET 2 big better flys in the rear and they are to loose, causing them to dump to quick and flood the motor out.Originally posted by pfcjal
I've been having a problem here lately and wondering if anyone could give me a hand. It seem that at WOT, when i get up to about 55-65, it starts bogging down, but when i let off and open it back up it does fine one up to 100. I'm really thinking it's got something to do with the carb(edelbrock quadrajet 750), but then again, it could bve th ignition, i don't really know alot about either. Just hoping someone might have a useful opinion, andy help will be greatly appreciated.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
01-26-2005 06:02 PM #3
Denny,
Could be an Edelbrock Q-Jet. Check it out.
http://www.edelbrock.com/automotive/carb_qjet.html
But I think you're spot on about the air valve above the secondaries. (Learned that with my old GTO)Jack
Gone to Texas
-
01-26-2005 06:11 PM #4
henry,when im wrong i dont mind you calling me denny, but denny might not like it . thanks for showing me that. never saw one.Originally posted by Henry Rifle
Denny,
Could be an Edelbrock Q-Jet. Check it out.
http://www.edelbrock.com/automotive/carb_qjet.html
But I think you're spot on about the air valve above the secondaries. (Learned that with my old GTO)
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
01-26-2005 06:14 PM #5
ps i would buy one of them if i needed a carb. looks better than the stock.Originally posted by lt1s10
henry,when im wrong i dont mind you calling me denny, but denny might not like it . thanks for showing me that. never saw one.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
01-26-2005 06:18 PM #6
no henry call you me. id have a talk with him if i was you. you dont know what kind of rep. i got down here in old va.Originally posted by DennyW
Did someone mention my name? Am I on someones mind, or did Joe tell Bill to call Henry to tell Jack that Louey was going over to Georges house to see Jim's new car by Sam's house?
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
01-26-2005 06:26 PM #7
pfcjal, disregard all of my previous post.
note: see henry rifle
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
01-26-2005 06:50 PM #8
first thing check fuel filter. q-jets also have a problem with the secondary wells leaking but you would notice this any time you open the throtle suddenly. next thing i would check is your fuel pump
-
01-26-2005 07:01 PM #9
Edlebrock bought the rochester Quadrajet Designe, and they make those performance tuned qjets, They may have bought the entire rochester company.Originally posted by lt1s10
henry,when im wrong i dont mind you calling me denny, but denny might not like it . thanks for showing me that. never saw one.
You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
-
01-26-2005 08:48 PM #10
just right off hand, i think it's a 1902, but i'll have to check it out later. thatnks for yall's help so far, i'll check i out.
......i take it back, 1901Last edited by pfcjal; 01-26-2005 at 09:00 PM.
-
01-27-2005 10:52 AM #11
I've got the same problem with my 350. I also thought it was the new EB 750. I changed to a Holly streetavenger. It helped just a little. I believe it is my ignition. Currently I'm running a Mallory distributor. I intend to switch to MSD. I've been told my spark arch may be too shallow.
-
01-27-2005 03:49 PM #12
Oops!Jack
Gone to Texas
-
01-27-2005 03:58 PM #13
thats all right henry, i think you put me into some pretty good company.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show





LinkBack URL
About LinkBacks
Reply With Quote
It would be nice if this up and down crap would cease.
Back online