The first set of headers I ordered and installed were the wrong ones and I had to ding the pipes quite a bit to get them to fit around the stearing box

They were also hanging quite a bit lower and would scrape when going over speed bumps or ruts in the road

Doing some good internet detective work and a few hours later produced a set of dynomax blackjack headers that was carried in stock at a local auto parts store and a price of $97.97

The new headers has been installed with a new set of cherry bombs

When I went to do both axles with new shoes i discovered that all the wheel cylinders need replaced

Both axels now have new cylinders, shoes and the drums all turned (Its nice to work for a repair shop and can get parts cheaper and use the equipment free of charge)

In a couple weeks the old holly 4 bbl is going to be replaced with a new shiney Elderbrock 600 Cfm

The old holly will get a new power valve and a rebuilt kit (Again) and be put in a box to the side and used as a spare part if ever needed