Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 454 Rockers not getting oil HELP!
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    tryme231's Avatar
    tryme231 is offline Registered User Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    ftlauderdale
    Posts
    2

    454 Rockers not getting oil HELP!

     



    There are a few of the rockers on a 1970 454 BB chevy not getting oil up to them. We have checked the pushrods and they are clear, installed new lifters and rockers and still no oil to a few of them. Always the same ones . The rear most drivers side rocker is getting a great supply of oil but the others on that side are just getting a little and the # 1 cylinder ex rocker is smoked from lack of oil. There are 2 on the pass side that are smoked too. Anyone ever seen this before? Any ideas? Any help would be very appreciated. Engine has about 10,000 miles on it and this seems to have just happened.

    Steve

  2. #2
    pro70z28's Avatar
    pro70z28 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    CC
    Car Year, Make, Model: 70 Camaro Z-28 Now/40 Chevy Back Then
    Posts
    4,306
    "PLAN" your life like you will live to 120.
    "LIVE" your life like you could die tomorrow.

    John 3:16
    >>>>>>

  3. #3
    viking's Avatar
    viking is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Branson area
    Car Year, Make, Model: 23 T, 53 FLH , 66 C-10 454, 03 CVPI
    Posts
    968

    Run a can of Gunk Motor Flush through it and see what happens
    Objects in the mirror are losing

  4. #4
    dunes's Avatar
    dunes is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    Calexico
    Posts
    10

    Hey! tryme231 some time ago I had a similar problem in my 69 camaro 454, my problem goten realy bad after driving it for some time, the cam lobe rounded out (some of them) also the bottom of the lifter had soo much wear that the oil pressure was going out to the bottom of the lifters. watch your oil pressure how bad is it....also check for very fine metal in your oil.......

  5. #5
    Monte Man's Avatar
    Monte Man is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    Bradenton
    Car Year, Make, Model: '78 Monte Carlo- 355ci
    Posts
    36

    You might have spun a cam bearing...... check it

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink