-
08-09-2020 07:51 AM #1
#1037 fel-pro head gaskets for gen IV block and heads
Hi , I'm new here. My question is, Fel-Pro told me to order the #1037 head gasket. My short block is already assembled and I do not have the lower cooling holes between the cylinders. I know Fel-Pro says to never modify their gaskets, but can't I just add one hole to the of each gasket. And if that is correct should I match the hole, or punch it to a certain size. Thanks for any light you can shed on this matter. P.S. It's for a drag race motor.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Thank you JOATMON That's the fitting I was wanting to try. Ordered it and will see if that works.
pwr steering rack leak