Thread: What is up with Howards Cams
-
03-18-2015 12:31 PM #1
What is up with Howards Cams
I ordered my cam in early January, with a 2 week delivery. I am still waiting, It is a roller cam for BB Chevy. Anybody else having an issue?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-18-2015 12:52 PM #2
-
03-18-2015 02:23 PM #3
I have called twice, today I got a promise for end of March.
-
03-18-2015 04:58 PM #4
Most likely its a core issue-Back in the day when Howards was in Cal, they made there onwn cores out of round stock, heat treated, ground, and parkerized right there in Watts-Today , don't have an idea--------- but if you need a cam and you have one that hasn't been reground before they (or someone else ) could probably do a turm around in 2-3 days
-
03-19-2015 11:06 AM #5
I suspect it has to do with most engine builders today going to roller cams instead of flat tappet and Howards having the best price in the industry. They're likely as busy as a one-armed paper hanger. When giving advice on Hotrodders.com, I usually spec out a Howards and I think there are about 75,000 members over there who read that stuff, not including the guys who just cruise through without being a member.
.Last edited by techinspector1; 03-19-2015 at 11:12 AM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel