-
11-20-2014 02:23 PM #1
ports
Can round port headers work on oval port heads and how much performance would there be lost if any.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-21-2014 07:54 AM #2
how big of a round port on headers ? i built them from 2inch to 2 3/8 for bigger engines there rules to the primary and how long the tube is and type of collector set up as well as mufflers ex tube size if X pipe is used all plays in to it but for a very mild bbc 1 7/8 is ok then from there every thing moves up on size . for a [] port to a O tube it takes less time to build headers as round. long as the header tube is not shutting port down your okLast edited by pat mccarthy; 11-22-2014 at 04:15 AM.
-
11-21-2014 04:50 PM #3
that makes sense thanks for the help I will make sure to measure my head ports
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel