Thread: Edelbrock cross ram Manifold.... .X-C96

Tweet

A few simple things to do to make the intake drive well don't go overboard on carbs mine has a set of 500 hundreds 56 jets in front and a stock plate set in back mechanical secondaries . you also have to balance the left and right side temporary i used some heater hose and fitting between the two banks accessing the blow out plugs . solid roller cam 247/257 @50 pulls to 6200 and will run more

Originally Posted by donjharper

A few simple things to do to make the intake drive well don't go overboard on carbs mine has a set of 500 hundreds 56 jets in front and a stock plate set in back mechanical secondaries . you also have to balance the left and right side temporary i used some heater hose and fitting between the two banks accessing the blow out plugs . solid roller cam 247/257 @50 pulls to 6200 and will run more

I am working on a bb build for my 70 chevy truck. I have a crossram on the shelf and have a few questions. What heads are you running, What lift cam, who's 500's. What compression and c.i. .