Thread: damaged push rods
Results 1 to 15 of 37
Threaded View
-
03-31-2014 06:04 PM #6
Ahh - much better. I absolutely concur w/Pat - roller tip rockers are not a good investment for your build. Roller cam - yes.
Is this the original cam and lifters? If so, you could have a couple lifters going soft as the springs in your new heads are much stiffer than the stock springs. So you may do just fine with a new cam and lifters..
Could you post a few pictures?"Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil





3Likes
LinkBack URL
About LinkBacks
Reply With Quote
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!