Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree2Likes
  • 1 Post By techinspector1
  • 1 Post By pat mccarthy

Thread: How can i make a 427 tall deck a cruizer in 1972 Chevelle
          
   
   

Reply To Thread
Results 1 to 6 of 6
  1. #1
    ChrisF is offline CHR Junior sMember Visit my Photo Gallery
    Join Date
    Sep 2013
    Location
    Richmond
    Posts
    1

    Cool How can i make a 427 tall deck a cruizer in 1972 Chevelle

     



    just got a 427 tall deck, i dont want a race car but i want something that sounds nice and able to squeal a tire or two, what do i have to do to make this motor a cruizer

  2. #2
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423
    HWORRELL likes this.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  3. #3
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    just did a tall deck 427 for a 72 chevelle street car /strip built it to 540 or 526 would not be more then tech.s 505 about $350 for the pistons .if you want cheap use a 427 piston CH 1.765 then use a 454 crank stroke of 4.000 and a rod 6.405 K1 makes a rod #ch6405aprb8-a with a O deck of 10.170 or a 454 piston of 1.645 CR and a 4.000 crank and rod of 6.535 every one makes rods in this size in I beam or Hbeam. O deck would be 10.180 CID it would not be more then in the CID 477 at a 100 over bore sonic check i do on any thing past .060 on bore. but at the end of the day playing around with a tall deck just to get under 500 CID or just 500 cid is may not be worth the work to some as i can get 489to 511 out of a stock 9.800 deck block cost is not much more for the 511 they would be custom pistons but not a big deal as many companys that build pistons would need only need to do a CH /Compessions Height changes from a stocking pistons. cost may not be much more. Malhle makes pistons but you need a engine that has never been deck is there no room for a deck clean up with there dumb CH built in there pistons O deck at 9.800 deck . back to the10.200 tall deck block JE/srp others make s a 1.395CH flat top with or small dome with a 4.500 crank and 6.535 rod thar gets you in the 525-540 club. you can go past the 4.250 crank in the tall deck all part cost the same for the bigger CID and not much more money or time and with a small bore 4.310 .060 over it 525 cid .125 out it.s a 540 CID
    Last edited by pat mccarthy; 09-26-2013 at 09:50 PM.
    HWORRELL likes this.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  4. #4
    HWORRELL's Avatar
    HWORRELL is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    ST.LOUIS
    Car Year, Make, Model: 31 FORD 5 WINDOW,69 442, 305 sprint car,
    Posts
    1,410

    I have one of those sitting in the corner of the garage. If there was a 55 chevy and nuff time left in this life, well .....

  5. #5
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I ran a .030 over bore and a 454 crank, 400 long rod and 454 open chamber Venolia piston--aluminum heads (not even milled) dual quads, light NO2 and went 8.003/ 169.98 in my Monza in my avarar-------

    ---------And I think one of the runs was the one in the avatar picture------

  6. #6
    hotrod68SS is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2014
    Location
    Baton Rouge
    Posts
    18

    I have a 427 car block already bored .060 with JE blower pistons o ringed block .427 20/20 steel crank all is ready to go..just needs .Some . eagle 6.635 lond rods or.500 long.
    I also.have a set of 049s .to make a great low compression pumpgas motor 7.6to1
    I have the BDS 871 blower also with 2 750 carbs
    I want to get this 535 tall.deck hi. Comp.
    Last edited by hotrod68SS; 04-08-2014 at 03:45 PM.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink