Quote Originally Posted by duhamske View Post
Thanks Pat. Although this is going in a street car, I do plan on taking it to the drags and in general terrorizing my town. I had a custom ground solid roller cam made for it with .736" lift intake/.740" exhaust, and my machinist suggested a stud girdle. This will not always be in my car, it will likely end up in a boat or another GM car.
well with iron heads i ran 740 lift cams with the isky iskyloy #9685 .240 on the seat and 685 open and have not used a girdle. now i not saying that a girdle would not help and if i built it i would talked you in to a Jomar bar set .BUT there trade offs and i could not run tall covers so there just was not any room .so on the new 548 alum head engine i went to the Yella Terra single shaft rocker arms i would not know about any terrorizing all the guys i hang out with do not know how to do any of this stuff i had a 548 14to8 on the street with the 990 rec ports i rework that was a custom grind 748/748 around 273/278 lsa 108 around there. we used it in some engines it was good grind had a copy made by isky.engine made over 750 hp in the mid 800s for TQ did it all under 6500 in one of my old street engines