Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Need to varifiy head gasket use
          
   
   

Results 1 to 2 of 2

Threaded View

  1. #1
    jimbos56 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2013
    Location
    chino valley
    Posts
    35

    Need to varifiy head gasket use

     



    I have a 70's 454 block with standard bore 4.250 and i have a set of felpro 1017 head gaskets can i use these gaskets?
    , oh have aftermarket aluminum heads.
    Also do i need to drill out the lower three holes on the block to match the holes in the gasket?
    Thanks jim
    Last edited by jimbos56; 05-19-2013 at 11:42 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink