Thread: cam question
-
06-25-2011 01:56 PM #1
cam question
my latest engine for my superstock mud racer is as follows;
.030 454 with trw forged flat tops
215 heads with 2.19/188 valves, mild exhaust porting
single plane edelbrock with holley 800 dp
melling 22204 cam, 502/527 lift with 214/224 duration with 107 lsa
is this cam going to be enough for this combo, I only used it because I know it makes the 15" of vacuum that I need in my class. Roller is not an option because that would tech me out of my class.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-25-2011 03:31 PM #2
Make a call to your cam grinder. They have all the info to answer your question intelligently.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project