Thread: bad lifter....

Tweet

well i would when intake is off wash it out with mineral sprites when the oil is drained at the least then change out the oil/filter very soon .if a nice engine it should be taken apart cleaned and honed.polish the crank. then put back together .on a cam i not going to pick you a roller cam out there to many cams grinder to pick from .but off the top of my head.@050. 223/235 and .585/.585.lsa 108 this cam will be done at 5500 .so you will have to put a rev limter on this engine there no need to go past 5500.less you like busted parts . your valve springs will not work with this or any hyd roller cam . pushrods will not work . you will needed to run a cam button end play must be .005 or so.for a hill or dune. mud running .boat hot street car i go up on the valve spring lbs