Thread: bad lifter....

Tweet

did you read my post? sure keep driving it.. all that ground up iron will cut the hell out of your pistons and bores .rings. then you have to take the engine apart to pick the chucks of iron out of the pistons skirts and hone all the score marks out of the bores if lucky if not some may not come out and re ring it .oil flows off the cam lands on the piston skirts .oil change will not help oil run down till it get s to the oil pan .the cam making sharp iron getting on parts that will not help any thing .sounds like you have your mind made up to run this engine? i re build and machine engines picking iron out of pistons is not that much fun