Thread: tons of bb questions
Results 1 to 15 of 15
LinkBack URL
About LinkBacksThreaded View
-
02-13-2011 07:37 PM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
yes you can use your small port intake .on the bigger heads . the iron crank will be fine .the cam . well look at the lifters one at a time if dish there junk .if you mix them up thats not a good thing they should be kept the way they were running in the engine .if your old cam/ lifters are good then you could swap the cam and need to use the lifters that where used on that cam. this would be a good time to look in a better cam RV cam new lifters .rige reamers can cut it the wall and honing will not fix it if more then 003 should be bored with new pistons if there a lot of tapperLast edited by pat mccarthy; 02-13-2011 at 07:40 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!