Thread: Opinions & HP Estimates

Tweet

Originally Posted by Ol'Blue454

Thanks for the info pat!

Oh and I forgot to add, the heads will have a fresh 3 angle valve job.

I hope the truck proves to be a good sleeper that I can go cruise the line with and have some fun in. There's a guy that cruises the line in an 86 chevy shortwide with a mildly built 383 in it with vortec heads and a nice sounding cam. I hope to give him a good run from a roll!

yep with a good tune it will not be hard to blow the back tires off .i say that any good machine shop the standard valve job is 3 angles. i use more at times or a full radius cutter with a 45 on the EX and back angle the ex valve and other things

Thanks Pat