Thread: Harmonic Balancer Dimensions
-
04-21-2010 05:23 PM #1
Harmonic Balancer Dimensions
I have a 1969 396 and the original balancer is slipping apart. It's a 7" but Summit Racing shows an 8" for this application. It was on the motor when I purchased it. Who's right? If it's supposed to be a 7" could I go to an 8"? Will it effect the performance? I know it will require changing the timing indicator.
Thanks.
Gary
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-21-2010 05:45 PM #2
Damper Doctor takes OEM dampers, presses them apart, then replaces the elastomeric material and presses them back together, clocking them properly so you can properly time the motor.
They show a 7" damper for a 396/402/427. There is an 8" damper listed for a 427 that would work with a different timing tab as you said.
Here's the 7"....
http://www.damperdoctor.com/Merchant...egory_Code=CHE
And the 8"....
http://www.damperdoctor.com/Merchant...egory_Code=CHEPLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Changed the shocks yesterday to OEM spec Monroe, they are still gas shocks. Disappointed that the ride is still very firm, it is not as bad but I was hoping for better. Might have something to do...
Stude M5 build