Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 6.0Liter Mark V crank--cast?forged?nodular?
          
   
   

Reply To Thread
Results 1 to 9 of 9

Hybrid View

  1. 02-28-2010 05:06 PM #1
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    well ...... they make a 366T deck yes would be around that size . i did not look up the block number s but its a tall deck not a good builder engine .its a small bore engine good for trucks .can not be bored to any thing big big gas truck engine a long with the 427T that block can be rework to get past 520 with a thick block 540 with a 4.500 crank use a 4.750 crank 571 cid this would be max bore not sure if i would build it this big with out a 1/2 fill with block rock
    Last edited by pat mccarthy; 02-28-2010 at 05:47 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink