Quote Originally Posted by R Pope View Post
Try setting the valves. I know a lot of guys try fudging the setting by not turning them down the last 1/4 turn or so, trying to delay "pump up" of the hydraulic lifters. Then, of course, they tap a bit at low speeds. Set 'em to manufacturer's specs and they usually work, unless they are Rhodes or some other freaky setup.
Setting the valves was the first thing I thought since the valve covers were leaking a bit any way that would be a good time to do it, this is when I noticed two rockers hitting the falve covers. The book calls for 1 full turn after lash but I've always went 1/4, but this time I went half and that took care of the rockers. I had it idleing and running great! I worked it a bit yesterday and if it were a rod it would definitly puked it out. I'm getting to the point I want' it to fail so I can find it, just can't afford an expensive fix.
Thanks to all with ideas, I know I'll narrow it down soon with the help of this forum! Keep em' coming!!!