Thread: need head advice
-
07-10-2009 02:15 PM #16
i am doing two bbc flat top blower engine with srp psitons at a 4.280 bore it 8.6 at 118 and 8.7 at 4.310 bore 060.over =496 i get very close to O deck i deck the block with the BHJ i then O the boring bar to the deck so every thing is on the money .so your block if i did it would be tru deck with BHJ and cut to 0 deck or in the hole to 005 .i would O deck the block .CC your heads and cut to 9.0 .getting to O deck will help .you will have to loose 3 cc if you use a 0.38 head gasket with a 4.370 bore that gets you very close to 9to1Last edited by pat mccarthy; 07-10-2009 at 02:25 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel